Product List
A New Product->Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
|_ Camshaft Thrust Buttons->
|_ Camshafts->
|_ Cylinder Heads->
|_ Dodge SRT4 Turbo->
|_ Engine Components->
|_ Engine Girdles->
|_ HEMI 5.7L, 6.1L, 6.4L Components->
|_ 5.7 / 6.1L Hemi Gasket Sets->
|_ 5.7 / 6.1 Hemi Alternator Fan
|_ 5.7 / 6.1 Hemi Roller Rockers
|_ 5.7 / 6.1 HEMI Turbo Kits
|_ 5.7 / 6.1L Billet Accessories
|_ 5.7 / 6.1L Hemi Axle Hub Kit
|_ 5.7 / 6.1L Hemi Belts
|_ 5.7 / 6.1L Hemi Bolts and Studs
|_ 5.7 / 6.1L Hemi Camshafts
|_ 5.7 / 6.1L Hemi Cold Air Kits
|_ 5.7 / 6.1L Hemi Connecting Rods
|_ 5.7 / 6.1L Hemi Converters->
|_ 5.7 / 6.1L Hemi Crank Dampers
|_ 5.7 / 6.1L Hemi Crankshafts
|_ 5.7 / 6.1L HEMI Engine Bearings
|_ 5.7 / 6.1L Hemi Exhaust
|_ 5.7 / 6.1L Hemi Fuel Injectors
|_ 5.7 / 6.1L Hemi Fuel Rails
|_ 5.7 / 6.1L Hemi Intake Manifolds
|_ 5.7 / 6.1L Hemi Nitrous Systems
|_ 5.7 / 6.1L HEMI Oil Pans->
|_ 5.7 / 6.1L Hemi Oiling System
|_ 5.7 / 6.1L Hemi Piston Rings
|_ 5.7 / 6.1L Hemi Pistons
|_ 5.7 / 6.1L Hemi Superchargers
|_ 5.7 / 6.1L Hemi Suspension
|_ 5.7 / 6.1L HEMI Throttle Bodies
|_ 5.7 / 6.1L Hemi Timing Sets
|_ 5.7 / 6.1L Hemi Transmissions
|_ 5.7 / 6.1L HEMI Tuning
|_ 5.7 / 6.1L Hemi Valvetrain
|_ 5.7 6.1 6.4 Hemi Cylinder Heads
|_ 5.7L Hemi Water Pump
|_ 6.1L HEMI Aluminum Blocks
|_ 6.1L Hemi Lifters
|_ Carbon Fiber
|_ Custom 5.7 / 6.1L Chipkiller
|_ Custom Hemi Billet Main Caps
|_ Custom Hemi Floor Mats
|_ Gen 3 Hemi Oil Squirter Plug
|_ Hemi 5.7 / 6.1L Power Packages
|_ Hemi 5.7 and 6.1L Valve Covers
|_ HEMI Drive Shaft Loop
|_ Hemi Serpentine Belt Conversions
|_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->
Customers
John,
Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->
Billy W.
.jpg "Billy W."){kind=small}
Dakota R/T 408
Read More ->
Craig W.
Thanks John, So far 8 races and 8 top Five!!
Read More ->
Josh F.
I've bought parts and dealt with vendors in my job every day for the last 15 years. I have never dealt with a vendor as helpful and punctual as you...
Read More ->
Daryl S.
Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->
Kyle M.
John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->
Jim W.
Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->
Brian C.
I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->
Robert S.
Great parts and service! Robert
Read More ->
Hannu O.
.png "Hannu O."){kind=small}
thank you very much from Finland!
Read More ->
Robert S.
426 Hemi Cuda
Read More ->
Jim A.
Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi.
Thanks for the Great Service!
Read More ->
Taylor M.
Thanks a lot John !
Read More ->
Ian A.
I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->
Bruce P.
John, you have been so prompt and helpful. Take care my friend and thanks again. I'll be back. Bruce
Read More ->
Clay B.
Thanks for everything !
Read More ->
Mitch C.
Awesome work! Glad I went with you guys! Anyone I know of that wants to build I'll send your way! Thanks John! Your the man!! Mitch
Read More ->
Brian A.
The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->
Colton H.
"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->
Jared B.
John, You Rock! Thanks again for the great deals and speedy service. Really appreciate it.
Jared
Dakota R/T
Read More ->
Bob F.
Plymouth 426 Hemi
Read More ->
Barbara H.
John, Thanks again for making Colton's dream come true! The truck is in the body shop, the cowl hood arrived and the new 408 engine you built is...
Read More ->
Ricky J.
Thanks for all the info, you have been a great help and a credit to your company.
Read More ->
Derek B.
Great Personalized service. Derek
Read More ->
David P.
Thanks for the brake lines !
Read More ->
5.7 6.1 6.4 Hemi Cylinder Heads
| Product Image | Item Name- | Price |
|---|---|---|
 |
5.7 Hemi Cylinder HeadsOur complete professionally ported Dodge 5.7 Hemi cylinder heads allow you to make the gains your after. With over 30 years cylinder head porting... |
Contact Us |
 |
5.7, 6.1, and 6.4 Hemi Ported Cylinder HeadsBring out the hidden power from your new 5.7, 6.1 or 6.4L Hemi ! Our complete professionally ported Dodge Hemi cylinder heads allow you to... |
Contact Us |
 |
6.1L Hemi Cylinder HeadOur complete professionally ported Dodge 6.1L Hemi cylinder heads allow you to make big gains. With over 30 years cylinder head porting... |
Contact Us |
 |
6.4L HEMI Cylinder HeadsOur Dodge 6.4L Hemi race ported cylinder heads for 2011 and up 392 (6.4L) SRT8 Chargers, Challengers and 300Cs are now available. We fully machine,... |
Contact Us |