m menu image  m home

Product List

A Chrysler 426 and 440 Blocks
A Mopar News
A New Mopar B/RB Windage Tray
A New Trick Flow Mopar Head
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 / 6.4 HEMI Bare Blocks
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
      |_ Custom HEMI TQ Converters
      |_ HEMI NAG1 A Torque Converters
      |_ Mopar Performance TQ Converters
      |_ Pro Torque Converters
      |_ Viper Torque Converters
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Mitch C.

Awesome work! Glad I went with you guys! Anyone I know of that wants to build I'll send your way! Thanks John! Your the man!! Mitch
Read More ->


Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


Brian R.

John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Ryan

bought numerous things and all transactions went very smooth. Responded to emails within a day or less. Ryan
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Kayden G.

Well John, your service is amazing if you want my opinion. Never had better from any company I've ordered from. Thanks, Kayden
Read More ->


Jim W.

Jim W.

Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->


Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


Gary H.

Gary H.

John, Thanks a lot !
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Darren B.

Darren B.

John, Thanks mate! The 440/533 stroker ran a 5.71 @ 122 mph on the eighth mile first time out with it's previous best 6.30 @ 108 mph ! Cheers
Read More ->


Ricky H.

Ricky H.

Thanks for everything John. The headers are great !
Read More ->


Tom R.

John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Harold R.

John, Thanks for the great customer service! Harold
Read More ->


Phil S.

Phil S.

Great job creating this Dakota R/T Ground Affects Kit. Phil
Read More ->


Pro Torque Hemi Torque Converters

Pro Torque has been in this business for over 45 years and that experience is evident everywhere you look at Pro-Torque. Joe Sr. has designed and built much of Pro-Torque's machinery and he still takes part in training new technicians. Joe Sr. has a strong presence in the manufacturing plant where his "get things done" attitude is put into practice. 

Pro-Torque's product line includes the highest quality remanufactured torque converters available, and we specialize in hard-to -find units including imports, antiques and industrial models. But ever since Joe Sr's research and development project on his own Street rod projects, high performance torque converters have been their passion. Pro-Torque is on the quest to produce the most advanced high performance torque converters for performance transmissions available.

Contact Southeast Performance for your application and pricing.




Parse Time: 0.165 - Number of Queries: 258 - Query Time: 0.0347908680725