m menu image  m home

Product List

A New Product->
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Jason B.

Thanks John.. you have been awesome to work with and I am REALLY looking forward to driving my SRT-10 again :) Jason
Read More ->


Bruce P.

Bruce P.

John, you have been so prompt and helpful. Take care my friend and thanks again. I'll be back. Bruce
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Hannu O.

Hannu O.

thank you very much from Finland!
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Michael D.

I just wish there were more guys like you around for us gen3 guys. Most just want a sale and don't care to actually help let alone give advice or...
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Shaine D.

Wow! Thank you for that quick and informative response. Must be why you are always recommended. Shaine
Read More ->


Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Felix C.

How awesome is this! This superb service is exactly on point w/what everyone have raved about. Thank you, Felix
Read More ->


Scot C.

Scot C.

Thanks for everything John. We will be doing business again. At Nationals 6.38 on a 6.54 dial in.
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


Robert S.

Robert S.

Great parts and service! Robert
Read More ->


5.7L Hemi SLP Coated Long Tube Headers w/ High-Flow Cats

SLP 05-07 5.7L Hemi Coated 1-3/4" Longtubes w/ High-Flow Cats.

SLP Performance Parts now offers Hemi powered Dodge Charger/Magnum and Chrysler 300C components to its line-up of late model Muscle Car parts they design, engineer and manufacture. The latest parts that are now available are the stainless steel Long Tube headers for the 2005-07 Hemi powered Dodge Charger/Magnum and Chrysler 300C. They also include mating stainless steel pipes and high-flow cats (CARB CERT. #4100).
SLP's header package is fully compatible with either factory stock or SLP's Cat-Back exhaust systems.
All hardware and installation instructions are included.

SLP's Long-Tube Stainless Steel Headers Feature:
  • Easy, bolt-on installation
  • 1-3/4" stainless steel primary tubes
  • 3" four-into-one collectors
  • 3" High-flow bullet cats CARB. CERT. #CA 4100 MMYY
  • CNC laser-cut, 3/8" thick header flanges
  • Hand fabricated with aluminum ceramic coating inside and out
  • Compatible with factory EGR
  • OEM quality O2 sensor extension harnesses
  • Maintains factory ground clearance and good underbody-to header clearance
  • SLP's Lifetime Warranty


Contact Southeast Performance for details and pricing.




Parse Time: 0.209 - Number of Queries: 256 - Query Time: 0.048932444793702