m menu image  m home

Product List

A New Product->
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Bruce P.

Bruce P.

John, you have been so prompt and helpful. Take care my friend and thanks again. I'll be back. Bruce
Read More ->


Ken L.

John, Thanks for all your help. I wish I had known about you before I ordered the rest of my stuff! Thanks, Ken
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Jared B.

John, You Rock! Thanks again for the great deals and speedy service. Really appreciate it. Jared Dakota R/T
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Josh F.

I've bought parts and dealt with vendors in my job every day for the last 15 years. I have never dealt with a vendor as helpful and punctual as you...
Read More ->


Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Pete L.

Pete L.

Mopar RB 440 Aluminum block with a Procharger. Makes 1600 HP!!
Read More ->


James G.

James G.

5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Hannu O.

Hannu O.

thank you very much from Finland!
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Daniel C.

Daniel C.

Thanks for your exemplary service. Keep doing what you're doing. Daniel C.
Read More ->


Harold R.

John, Thanks for the great customer service! Harold
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Andrew R.

Andrew R.

I am very pleased with the quality of the magnum deep pan, and the best part is that it really is not much deeper than the stock pan so I dont have...
Read More ->


Scot C.

Scot C.

Thanks for everything John. We will be doing business again. At Nationals 6.38 on a 6.54 dial in.
Read More ->


Kayden G.

Kayden G.

Well your service is amazing. Never had better from any company I've ordered from! Kayden
Read More ->


Mike M.

John's very honest, something that's hard to find these days. This means he'll tell you the truth and you may not want to hear it. LOL. The best...
Read More ->


Steve V.

Steve V.

You are the only guy who I trust to do the most important thing I'll ever do to my Roadrunner, a car that means more to me than any inanimate object...
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


5.7L HEMI 360 HP Carb Kit

This is a complete, fully tuned solution that was developed to provide the simplest, easiest and most cost effective way to run a 5.7 HEMI in whatever type of vehicle you like. Until now, full EFI solutions were both complex and expensive. Our solution has been fully engine dyno tested and optimized. Further, it has been installed in one of our vehicles to dial in driveability and responsiveness.

The 11-3802 kit comes fully tuned to make 360 HP and Includes: 

             * 5.7 HEMI Aluminum Intake Manifold

             *Engine Controller - Fully programmed with tuning for stock 5.7 HEMI Cam Profile

             *Controller wiring harness

**  The complete kit including carburetor is the 11-3803:

Contact Southeast Performance for applications and pricing.




Parse Time: 0.229 - Number of Queries: 258 - Query Time: 0.051817110580445