m menu image  m home

Product List

A Community is Heard
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 / 6.4 HEMI Bare Blocks
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel System Components->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Billy W.

Billy W.

Dakota R/T 408
Read More ->


Troy K.

Troy K.

Dodge Viper
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Alan P.

First off, I just have to say that I have never came across a more stand-up guy that takes his time to connect with his customers and have the...
Read More ->


Manley 5.7 and 6.1L Hemi Connecting Rods

Manley 5.7L & 6.1L HEMI Pro Series "I" Beam Rods

  • Forged from 4340 aircraft quality vacuum degassed material
  • Fully machined to produce the lightest and strongest rod possible
  • Shot peened after machining to Mil specs and 100% individually magnafluxed
  • Cap fasteners are 7/16" ARP 2000 or 7/16" ARP 3.5 cap screws
  • Horsepower range for these rods is 800 H.P. at 8000 rpm with ARP 2000 and 1,000+ H.P. at 8,500 with ARP 3.5

Horsepower range is affected by rpm, stroke and piston weight.

NOTE: Please specify the wrist pin diameter you intend to run when placing your order. The stock 5.7 HEMI uses a 24mm/.945" wrist pin and the 6.1 HEMI uses a 25mm/.984" wrist pin from the factory. The pistons you are using must have floating pins with a diameter of .927" or 24mm/.945".

All connecting rods on this page are supplied with 1.450" under head length 7/16" ARP 2000 cap screw fasteners P/N 42390. Upgraded 7/16" ARP 3.5 cap screws P/N 42359 are available.

Contact Southeast Performance for your application and pricing.




Parse Time: 0.189 - Number of Queries: 250 - Query Time: 0.0269852578735