m menu image  m home

Product List

A A New Disc Brake Conversion
A Chrysler 426 and 440 Blocks
A Mopar "Cast Iron" Race Blocks
A Mopar News
A New Mopar B/RB Windage Tray
A New Mopar SB Cylinder Head
A New Trick Flow Mopar Head
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


Robert M.

John, Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->


Jim W.

Jim W.

Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->


Buyer

Super guy to deal with! GREAT SERVICE!! GREAT PRICE!!
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Ricky H.

Ricky H.

Thanks for everything John. The headers are great !
Read More ->


Brian R.

John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->


Clay B.

Clay B.

Thanks for everything !
Read More ->


Hannu O.

Hannu O.

thank you very much from Finland!
Read More ->


Dan B.

Dan B.

Dakota R/T 408, Thanks for everything! Dan https://www.youtube.com/watch?v=wZekmXKYXA4
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Gary H.

Gary H.

John, Thanks a lot !
Read More ->


James G.

James G.

5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


Scot C.

Scot C.

Thanks for everything John. We will be doing business again. At Nationals 6.38 on a 6.54 dial in.
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Ken L.

John, Thanks for all your help. I wish I had known about you before I ordered the rest of my stuff! Thanks, Ken
Read More ->


Kris L.

John, Sitting in the car with a big smile on my face. Thanks for the quality brand products and the great price. Cheers Kris
Read More ->


Mitch C.

Awesome work! Glad I went with you guys! Anyone I know of that wants to build I'll send your way! Thanks John! Your the man!! Mitch
Read More ->


5.7 / 6.1L Hemi Intake Manifolds



Product Image Item Name- Price
5.7 and 6.1L Hemi Aluminum EFI Intake Manifolds

5.7 and 6.1L Hemi Aluminum EFI Intake Manifolds

Southeast Performance offers single plane intake manifolds to create serious horsepower with the 5.7 and 6.1 HEMI. Our manifolds were CAD designed,...
Contact Us
5.7 and 6.1L Hemi Carb Aluminum Intake Manifold

5.7 and 6.1L Hemi Carb Aluminum Intake Manifold

Southeast Performance now offers single plane aluminum intake manifolds to create serious horsepower with the 5.7 and 6.1 HEMI. Our manifolds were...
Contact Us
5.7L HEMI 360 HP Carb Kit

5.7L HEMI 360 HP Carb Kit

This is a complete, fully tuned solution that was developed to provide the simplest, easiest and most cost effective way to run a 5.7 HEMI in...
Contact Us
5.7L Mopar Hemi Aluminum Carb Intake Manifolds

5.7L Mopar Hemi Aluminum Carb Intake Manifolds

5.7L Crate Motor Carbureted Single Plane Intake Manifold, Small Plenum, Aluminum. Drilled with the standard Holley pattern.Contact Southeast...
Contact Us
5.7L Mopar Hemi EFI Aluminum Intake Manifold

5.7L Mopar Hemi EFI Aluminum Intake Manifold

5.7L Crate Motor EFI Single Plane Intake Manifold, Low Rise, Small Plenum, Aluminum. Drilled with the standard Holley pattern. Contact Southeast...
Contact Us
Dodge 6.1L Hemi Custom Ported Intake Manifolds

Dodge 6.1L Hemi Custom Ported Intake Manifolds

Upgrade your 6.1 HEMI SRT-8 Dodge Charger, SRT-8 Chrysler 300c, or SRT-8 Dodge Magnum on a budget. The throat of the ported intake manifold is opened...
Contact Us



Parse Time: 0.235 - Number of Queries: 309 - Query Time: 0.060182857040405