Product List
A A New Disc Brake ConversionA Chrysler 426 and 440 Blocks
A Mopar "Cast Iron" Race Blocks
A Mopar News
A New Mopar B/RB Windage Tray
A New Mopar SB Cylinder Head
A New Trick Flow Mopar Head
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
|_ Camshaft Thrust Buttons->
|_ Camshafts->
|_ Cylinder Heads->
|_ Dodge SRT4 Turbo->
|_ Engine Components->
|_ Connecting Rods->
|_ Crankshaft Dampers->
|_ Crankshafts->
|_ Engine Bearings->
|_ Engine Block Main Caps->
|_ Engine Blocks->
|_ Brodix Engine Blocks
|_ Dart Engine Blocks
|_ Indy Max Mopar Engine Blocks
|_ Koffel's Place Engine Blocks
|_ Mopar "Cast Iron" Race Blocks
|_ Mopar Performance Engine Blocks
|_ R3 Engine Blocks
|_ World Engine Blocks
|_ Engine Rotating Assemblies->
|_ Lifters->
|_ Mopar B/RB Windage Tray
|_ Oil Pans->
|_ Oil Pumps->
|_ Piston Rings->
|_ Pistons->
|_ Pushrods->
|_ Timing Chain sets->
|_ Engine Girdles->
|_ HEMI 5.7L, 6.1L, 6.4L Components->
|_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->
Customers
426 Hemi Cuda
Read More ->
Jared B.
John, You Rock! Thanks again for the great deals and speedy service. Really appreciate it.
Jared
Dakota R/T
Read More ->
Kyle M.
John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->
Colton H.
"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->
Kayden G.
Well John, your service is amazing if you want my opinion. Never had better from any company I've ordered from. Thanks, Kayden
Read More ->
Shaine D.
Wow! Thank you for that quick and informative response. Must be why you are always recommended.
Shaine
Read More ->
Tom R.
John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->
Bill S.
Thanks John,
426 Hemi stroker 588
https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->
David A.
Thanks for everything, David
Read More ->
Phil S.
Great job creating this Dakota R/T Ground Affects Kit. Phil
Read More ->
Bob F.
Plymouth 426 Hemi
Read More ->
Dan B.
Dakota R/T 408, Thanks for everything! Dan
https://www.youtube.com/watch?v=wZekmXKYXA4
Read More ->
Matt C.
Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->
Brian C.
I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->
Ken L.
John,
Thanks for all your help. I wish I had known about you before I ordered the rest of my stuff!
Thanks,
Ken
Read More ->
Billy W.
.jpg "Billy W."){kind=small}
Dakota R/T 408
Read More ->
Steve F.
Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->
Steve B.
Thanks for the help with my 426 stroker.
Read More ->
Matt G.
I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->
Robert M.
John,
Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->
Carl E.
Dodge SRT-10 Viper
Read More ->
Michael W.
After getting all the compatible stuff shes a beast!
Michael
Read More ->
Brian R.
John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->
Hannu O.
.png "Hannu O."){kind=small}
thank you very much from Finland!
Read More ->
Robert S.
Great parts and service! Robert
Read More ->
Mopar Performance Engine Blocks
| Product Image | Item Name- | Price |
|---|---|---|
 |
"NEW" Chrysler Aluminum 440 Wedge Engine Blocks"NEW" Chrysler 440 wedge aluminum engine blocks. These blocks feature * 100 percent CNC-machined for accuracy and quality * Brand new... |
Contact Us |
 |
Mopar 6.1 HEMI Aluminum Blocks"New" Chrysler 6.1L HEMI Bare Blocks. Please contact Southeast Performance for availability and pricing. |
Contact Us |
 |
Mopar P5 Aluminum Race BlocksR5 P7 Aluminum Race Block This is a Block Only. No Rotating Assemblies are Included. Contact Southeast Performance for details and pricing. |
Contact Us |