m menu image  m home

Product List

A A New Disc Brake Conversion
A Chrysler 426 and 440 Blocks
A Mopar "Cast Iron" Race Blocks
A Mopar News
A New Mopar B/RB Windage Tray
A New Mopar SB Cylinder Head
A New Trick Flow Mopar Head
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Alan P.

First off, I just have to say that I have never came across a more stand-up guy that takes his time to connect with his customers and have the...
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Mike M.

John's very honest, something that's hard to find these days. This means he'll tell you the truth and you may not want to hear it. LOL. The best...
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


James G.

James G.

5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->


Darren B.

Darren B.

John,Racing flat out on the 440/533 engine over 1 season & 65 passes at 8.97@150mph 1.27 60' getting great results!!Engine is GREAT!Thanks mate!
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Jason B.

Thanks John.. you have been awesome to work with and I am REALLY looking forward to driving my SRT-10 again :) Jason
Read More ->


Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Buyer

Super guy to deal with! GREAT SERVICE!! GREAT PRICE!!
Read More ->


Robert S.

Robert S.

426 Hemi Cuda
Read More ->


Clay B.

Clay B.

Thanks for everything !
Read More ->


Robert S.

Robert S.

Great parts and service! Robert
Read More ->


Gary H.

Gary H.

John, Thanks a lot !
Read More ->


Maurice

Maurice

Maurice 73 Dodge Dart
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Phil S.

Phil S.

Great job creating this Dakota R/T Ground Affects Kit. Phil
Read More ->


Kayden G.

Well John, your service is amazing if you want my opinion. Never had better from any company I've ordered from. Thanks, Kayden
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Tom R.

John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->


K1 Technologies Rotating Assemblies

K1 Technologies produces high performance and auto racing engine parts, and is dedicated to providing world class "energy transfer technology" at an affordable price.

These are K1 Forged 4340 Crankshafts. Material properties are closely monitored for optimum performance. Counterweight placements designed for improved crankshaft performance. .125" fillet radii. Nitrided for improved bearing life. Straight hole oiling system for better lubrication. Size tolerances held to +/- .0001”.

You'll find these crankshafts are top quality and you can't beat the price for what you're getting. Rely on K1 for your performance crankshaft needs!

Contact Southeast Performance for your applications and pricing.




Parse Time: 0.164 - Number of Queries: 263 - Query Time: 0.0302855692291