m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Alexander F.

Alexander F.

Hey John! Roller Rockers are still in and have been great. I get almost 18mpg highway! I seriously appreciate all your help.
Read More ->


Gary H.

Gary H.

John, Thanks a lot !
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Harold R.

John, Thanks for the great customer service! Harold
Read More ->


Ossi L.

you come highly recommended to me by Finnish racers!
Read More ->


Brian R.

John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->


Steve V.

Steve V.

You are the only guy who I trust to do the most important thing I'll ever do to my Roadrunner, a car that means more to me than any inanimate object...
Read More ->


Jim W.

Jim W.

Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


James G.

James G.

5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->


Marko T.

Marko T.

Hi John! Thanks again for the great service! Marko T. Finland
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Barbara H.

John, Thanks again for making Colton's dream come true! The truck is in the body shop, the cowl hood arrived and the new 408 engine you built is...
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Daniel C.

Daniel C.

Thanks for your exemplary service. Keep doing what you're doing. Daniel C.
Read More ->


Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Ian A.

Ian A.

I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->


Robert S.

Robert S.

426 Hemi Cuda
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Doug B.

Doug B.

My experience with Southeast Performance and John has been amazing. My Viper has gained another 200hp and drives fabulous. Thanks for everything!
Read More ->


Steven

Southeast Performance and John Mercedes have been "OUTSTANDING" to do business with. I couldn't be happier.
Read More ->


Callies 5.7 and 5.7 Hemi Crankshafts

Callies Performance Products began manufacturing high performance crankshafts in 1989. With many years of engineering and employee experience, Callies has grown to be the industry leader for innovative product design. We take pride in staying ahead of the competition with the latest high tech design and manufacturing advantages. By utilizing the latest in computer aided solid modeling and CNC machining centers, Callies is able to offer the best designed, highest quality crankshafts available on the market today.

Callies Crankshafts are at the top of the industry for quality of finish and reliability. Our precise, no compromise production efforts deliver dimensional accuracy that is second to none. Concentricity and surface finish are the two most desirable features in a high performance crankshaft journal. Each journal must be perfectly concentric to it's specified centerline, and journal surface lobbing (microscopic peaks and valleys in the journal surface) must be limited to no more than .00006" to further enhance oil film integrity at high engine speeds.

Every crankshaft is 100 percent inspected for critical dimensions, and the manufacturing equipment is constantly monitored for tolerance drift and tool degradation. At Callies, quality and durability really are a driving force behind our products.

Contact Southeast Performance for your application and pricing.




Parse Time: 0.221 - Number of Queries: 262 - Query Time: 0.049074001495361