m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Daniel C.

Daniel C.

Thanks for your exemplary service. Keep doing what you're doing. Daniel C.
Read More ->


Robbie C.

Robbie C.

Great job all round !
Read More ->


Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Chris B.

Chris B. won the late model feature easily Texas Motor Speedway.
Read More ->


Ricky R.

Ricky R.

1937 Chevy Legends Race Car, Thanks for everything!
Read More ->


Kris L.

John, Sitting in the car with a big smile on my face. Thanks for the quality brand products and the great price. Cheers Kris
Read More ->


Robert A.

Dude you are badass, no one and I mean one has made me feel better about getting work done then you and I appreciate that. thanks a million
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Jason B.

Thanks John.. you have been awesome to work with and I am REALLY looking forward to driving my SRT-10 again :) Jason
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


William K.

William K.

Well your service is amazing if you want my opinion. Never had better from any company I've ordered from. William K.
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


William K.

You do outstanding work man. My whole crew is ready to see your work in action ;-)
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Jim W.

Jim W.

Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->


Alexander F.

Alexander F.

Hey John! Roller Rockers are still in and have been great. I get almost 18mpg highway! I seriously appreciate all your help.
Read More ->


Shaine D.

Wow! Thank you for that quick and informative response. Must be why you are always recommended. Shaine
Read More ->


Josh F.

I've bought parts and dealt with vendors in my job every day for the last 15 years. I have never dealt with a vendor as helpful and punctual as you...
Read More ->


Andrew R.

Andrew R.

I am very pleased with the quality of the magnum deep pan, and the best part is that it really is not much deeper than the stock pan so I dont have...
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Custom Hemi Logo Floor Mats

YARN TYPE:
Premium Nylon yarn is the best. It not only wears longer, it also retains its appearance longer. Plus it has a luxurious soft feel. Lloyd Mats uses Premium 100% continuous filament nylon face. It’s the same type of yarn used by many auto manufacturers for their original equipment carpeting. If you look at other company’s mats and the yarn is not identified as nylon, it’s a sure indication that it’s a lesser quality mat.

YARN DENSITY:
Lloyd's mats take 32 ounces of Premium nylon yarn and jammed them right next to each other. You can barely dig your fingers down through the yarn to the bottom of the mat. This is called heavy yarn density. It’s this heavy density of premium nylon yarn that accounts for Lloyd’s exceptionally long wearing mats.

WARRANTY:
Lloyd's mats are the finest quality floor mat available. Therefore, all Lloyd's mats are warranted for a full two years from the date of purchase.

BACKING:
Mat backing is used to keep the mat from slipping. However, mats with rubber or vinyl nibs can actually harm the vehicle’s original carpeting, as the mat’s nibs dig down between the carpet fibers. This can result in premature wear out of the O.E. carpeting, as the vehicle's carpeting wears out at the base instead of from the top down. Lloyd’s textured TractionBacTM mat backing is made with a very pure rubberized compound. It’s the natural adhesion characteristics of this backing that keeps the mats in place.

FASTENERS:
Wherever possible, Lloyd’s mats have a fastening system that is compatible with any mat fasteners provided by the vehicle manufacturer. These patented devices are easy to install and yet provide for fast mat removal for cleaning. Slipping mats are a thing of the past.

EMBROIDERY:
Officially licensed logos available.

COLORS:
White embroidery color is not available with black mats. Silver would be the closest match.
Floor mat colors do not necessarily match perfectly to your factory interior/mat colors. Color samples can be sent upon request.
Colors shown on this page are for reference use only. Depending on your monitor settings, these colors may not accurately reflect the true colors of the mats.

BINDING (EDGING):
Lloyd Mats are finished with an attractive and durable color coordinated nylon velour edging. There’s no yarn to unravel. Optional edging made of vinyl (as opposed to velour) in your choice of color is available. Select color options below for vinyl binding, otherwise select none for the standard color matched velour edging.

NOTE:
Sold in sets of four, a quantity of 1 will get you two front mats and two rear mats. The trunk mat and trunk mat embroidery options are available at an additional cost. The shape of the floor mat images in the options below do not necessarily represent the shape of the actual mats you will receive. You may select your options below.

SHIPPING NOTE:
These ship via UPS Ground from California 3-5 days after you order. Allow 7 additional business days for transit.

RETURNS:
Due to the custom nature of these mats and/or embroidery we cannot accept exchanges. Please make your selections carefully. If you have any questions please email us.

Contact Southeast Performance for details on your custom logo floor mats.




Parse Time: 0.222 - Number of Queries: 262 - Query Time: 0.050416187606812