m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Hannu O.

Hannu O.

thank you very much from Finland!
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


Pete L.

Pete L.

Mopar RB 440 Aluminum block with a Procharger. Makes 1600 HP!!
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Felix C.

How awesome is this! This superb service is exactly on point w/what everyone have raved about. Thank you, Felix
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


Barbara H.

John, Thanks again for making Colton's dream come true! The truck is in the body shop, the cowl hood arrived and the new 408 engine you built is...
Read More ->


Jared B.

John, You Rock! Thanks again for the great deals and speedy service. Really appreciate it. Jared Dakota R/T
Read More ->


Darren B.

Darren B.

John,Racing flat out on the 440/533 engine over 1 season & 65 passes at 8.97@150mph 1.27 60' getting great results!!Engine is GREAT!Thanks mate!
Read More ->


Steven

Southeast Performance and John Mercedes have been "OUTSTANDING" to do business with. I couldn't be happier.
Read More ->


Don S.

John, I can't emphasize this enough, but without the help you're getting me I could not have afforded my dream engine! I literally have cringed when...
Read More ->


Bruce P.

Bruce P.

You’ve got a big fan in me. Oh yeah, the car is awesome. Runs like a raped ape. So thanks a lot !
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Ken L.

John, Thanks for all your help. I wish I had known about you before I ordered the rest of my stuff! Thanks, Ken
Read More ->


Chris B.

Chris B. won the late model feature easily Texas Motor Speedway.
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Rob D.

John is a real awesome guy. i couldn't thank u enough for all the help over 7-8 years.
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Marko T.

Marko T.

I have been building cars over 20 years and you have been the best parts dealer ever! Thanx for your friendship! -Marko, Finland
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Josh F.

I've bought parts and dealt with vendors in my job every day for the last 15 years. I have never dealt with a vendor as helpful and punctual as you...
Read More ->


Custom Logo 300C Floor Mats

YARN TYPE:
Premium Nylon yarn is the best. It not only wears longer, it also retains its appearance longer. Plus it has a luxurious soft feel. Lloyd Mats uses Premium 100% continuous filament nylon face. It’s the same type of yarn used by many auto manufacturers for their original equipment carpeting. If you look at other company’s mats and the yarn is not identified as nylon, it’s a sure indication that it’s a lesser quality mat.

YARN DENSITY:
Lloyd's mats take 32 ounces of Premium nylon yarn and jammed them right next to each other. You can barely dig your fingers down through the yarn to the bottom of the mat. This is called heavy yarn density. It’s this heavy density of premium nylon yarn that accounts for Lloyd’s exceptionally long wearing mats.

WARRANTY:
Lloyd's mats are the finest quality floor mat available. Therefore, all Lloyd's mats are warranted for a full two years from the date of purchase.

BACKING:
Mat backing is used to keep the mat from slipping. However, mats with rubber or vinyl nibs can actually harm the vehicle’s original carpeting, as the mat’s nibs dig down between the carpet fibers. This can result in premature wear out of the O.E. carpeting, as the vehicle's carpeting wears out at the base instead of from the top down. Lloyd’s textured TractionBacTM mat backing is made with a very pure rubberized compound. It’s the natural adhesion characteristics of this backing that keeps the mats in place.

FASTENERS:
Wherever possible, Lloyd’s mats have a fastening system that is compatible with any mat fasteners provided by the vehicle manufacturer. These patented devices are easy to install and yet provide for fast mat removal for cleaning. Slipping mats are a thing of the past.

EMBROIDERY:
Officially licensed logos available.

COLORS:
White embroidery color is not available with black mats. Silver would be the closest match.
Floor mat colors do not necessarily match perfectly to your factory interior/mat colors. Color samples can be sent upon request.
Colors shown on this page are for reference use only. Depending on your monitor settings, these colors may not accurately reflect the true colors of the mats.

BINDING (EDGING):
Lloyd Mats are finished with an attractive and durable color coordinated nylon velour edging. There’s no yarn to unravel. Optional edging made of vinyl (as opposed to velour) in your choice of color is available. Select color options below for vinyl binding, otherwise select none for the standard color matched velour edging.

NOTE:
Sold in sets of four, a quantity of 1 will get you two front mats and two rear mats. The trunk mat and trunk mat embroidery options are available at an additional cost. The shape of the floor mat images in the options below do not necessarily represent the shape of the actual mats you will receive. You may select your options below.

SHIPPING NOTE:
These ship via UPS Ground from California 3-5 days after you order. Allow 7 additional business days for transit.

RETURNS:
Due to the custom nature of these mats and/or embroidery we cannot accept exchanges. Please make your selections carefully. If you have any questions please email us.

Contact Southeast Performance for details on your custom logo floor mats.




Parse Time: 0.211 - Number of Queries: 262 - Query Time: 0.04846703413391