m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Ian A.

Ian A.

I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->


David P.

David P.

Thanks for the brake lines !
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Clay B.

Clay B.

Thanks for everything !
Read More ->


Ricky J.

Thanks for all the info, you have been a great help and a credit to your company.
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Ryan

bought numerous things and all transactions went very smooth. Responded to emails within a day or less. Ryan
Read More ->


Ossi L.

you come highly recommended to me by Finnish racers!
Read More ->


Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Phil S.

Phil S.

Great job creating this Dakota R/T Ground Affects Kit. Phil
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Bill S.

Bill S.

Thanks John, 426 Hemi stroker 588 https://www.youtube.com/watch?v=1dJdt0ZFzjU
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


Bruce P.

Bruce P.

You’ve got a big fan in me. Oh yeah, the car is awesome. Runs like a raped ape. So thanks a lot !
Read More ->


Harold R.

John, Thanks for the great customer service! Harold
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


David C.

Southeastern Performance has my vote. Thanks again!
Read More ->


William K.

You do outstanding work man. My whole crew is ready to see your work in action ;-)
Read More ->


Dodge Hemi Charger Custom Floor Mats

YARN TYPE:
Premium Nylon yarn is the best. It not only wears longer, it also retains its appearance longer. Plus it has a luxurious soft feel. Lloyd Mats uses Premium 100% continuous filament nylon face. It’s the same type of yarn used by many auto manufacturers for their original equipment carpeting. If you look at other company’s mats and the yarn is not identified as nylon, it’s a sure indication that it’s a lesser quality mat.

YARN DENSITY:
Lloyd's mats take 32 ounces of Premium nylon yarn and jammed them right next to each other. You can barely dig your fingers down through the yarn to the bottom of the mat. This is called heavy yarn density. It’s this heavy density of premium nylon yarn that accounts for Lloyd’s exceptionally long wearing mats.

WARRANTY:
Lloyd's mats are the finest quality floor mat available. Therefore, all Lloyd's mats are warranted for a full two years from the date of purchase.

BACKING:
Mat backing is used to keep the mat from slipping. However, mats with rubber or vinyl nibs can actually harm the vehicle’s original carpeting, as the mat’s nibs dig down between the carpet fibers. This can result in premature wear out of the O.E. carpeting, as the vehicle's carpeting wears out at the base instead of from the top down. Lloyd’s textured TractionBacTM mat backing is made with a very pure rubberized compound. It’s the natural adhesion characteristics of this backing that keeps the mats in place.

FASTENERS:
Wherever possible, Lloyd’s mats have a fastening system that is compatible with any mat fasteners provided by the vehicle manufacturer. These patented devices are easy to install and yet provide for fast mat removal for cleaning. Slipping mats are a thing of the past.

EMBROIDERY:
Officially licensed logos available.

COLORS:
White embroidery color is not available with black mats. Silver would be the closest match.
Floor mat colors do not necessarily match perfectly to your factory interior/mat colors. Color samples can be sent upon request.
Colors shown on this page are for reference use only. Depending on your monitor settings, these colors may not accurately reflect the true colors of the mats.

BINDING (EDGING):
Lloyd Mats are finished with an attractive and durable color coordinated nylon velour edging. There’s no yarn to unravel. Optional edging made of vinyl (as opposed to velour) in your choice of color is available. Select color options below for vinyl binding, otherwise select none for the standard color matched velour edging.

NOTE:
Sold in sets of four, a quantity of 1 will get you two front mats and two rear mats. The trunk mat and trunk mat embroidery options are available at an additional cost. The shape of the floor mat images in the options below do not necessarily represent the shape of the actual mats you will receive. You may select your options below.

SHIPPING NOTE:
These ship via UPS Ground from California 3-5 days after you order. Allow 7 additional business days for transit.

RETURNS:
Due to the custom nature of these mats and/or embroidery we cannot accept exchanges. Please make your selections carefully. If you have any questions please email us.

Contact Southeast Performance for details on your custom logo floor mats.




Parse Time: 0.246 - Number of Queries: 262 - Query Time: 0.061909873580931