m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Robert S.

Robert S.

426 Hemi Cuda
Read More ->


Tom R.

John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Kayden G.

Kayden G.

Well your service is amazing. Never had better from any company I've ordered from! Kayden
Read More ->


Robert S.

Robert S.

Great parts and service! Robert
Read More ->


Barbara H.

John, Thanks again for making Colton's dream come true! The truck is in the body shop, the cowl hood arrived and the new 408 engine you built is...
Read More ->


Harold R.

John, Thanks for the great customer service! Harold
Read More ->


Brian R.

John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


William K.

You do outstanding work man. My whole crew is ready to see your work in action ;-)
Read More ->


Marko T.

Marko T.

Hi John! Thanks again for the great service! Marko T. Finland
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Josh F.

I've bought parts and dealt with vendors in my job every day for the last 15 years. I have never dealt with a vendor as helpful and punctual as you...
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Michael D.

I just wish there were more guys like you around for us gen3 guys. Most just want a sale and don't care to actually help let alone give advice or...
Read More ->


Ian A.

Ian A.

I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->


Daniel C.

Daniel C.

Thanks for your exemplary service. Keep doing what you're doing. Daniel C.
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Craig W.

Craig W.

Thanks John, So far 8 races and 8 top Five!!
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Gary H.

Gary H.

John, Thanks a lot !
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


5.7, 6.4 HEMI Phaser VVT Camshafts

COMP Cams® Chrysler Hemi Phaser Camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshaft to move in real time. Instead of scrapping this advanced system, COMP Cams® has embraced it with a new line of aftermarket Hemi specific cams. These patent pending Hemi Phaser Camshafts work with phaser limiters or locks to fully utilize Chrysler’s Variable Valve Timing (VVT) technology, which allows the camshaft to pick up torque in the low end of the engine while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street /strip engines. Their unique design maintains piston to valve clearance while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks and Mopar crate engines with VVT. The camshafts are available as both custom and three different off-the-shelf grinds dependent upon engine type for improved performance over OEM options. COMP Cams® Phaser Limiter or Lock Kits limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and are required for use. This Cam requires Additional Parts such as Comp Cams Phase Limiter, Spring Kit 2 (Springs/Retainers/Locators), Non-MDS Lifters For Automatic Transmissions, Custom Tuning




Parse Time: 0.206 - Number of Queries: 262 - Query Time: 0.048395559371948