m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Ricky J.

Thanks for all the info, you have been a great help and a credit to your company.
Read More ->


Doug B.

Doug B.

My experience with Southeast Performance and John has been amazing. My Viper has gained another 200hp and drives fabulous. Thanks for everything!
Read More ->


Robert M.

John, Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->


Alan P.

First off, I just have to say that I have never came across a more stand-up guy that takes his time to connect with his customers and have the...
Read More ->


Rob D.

John is a real awesome guy. i couldn't thank u enough for all the help over 7-8 years.
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Steven

Southeast Performance and John Mercedes have been "OUTSTANDING" to do business with. I couldn't be happier.
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Darren B.

Darren B.

John,Racing flat out on the 440/533 engine over 1 season & 65 passes at 8.97@150mph 1.27 60' getting great results!!Engine is GREAT!Thanks mate!
Read More ->


Ken L.

John, Thanks for all your help. I wish I had known about you before I ordered the rest of my stuff! Thanks, Ken
Read More ->


William K.

William K.

Well your service is amazing if you want my opinion. Never had better from any company I've ordered from. William K.
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Ian A.

Ian A.

I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->


Dan B.

Dan B.

Dakota R/T 408, Thanks for everything! Dan https://www.youtube.com/watch?v=wZekmXKYXA4
Read More ->


Tom R.

John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Bruce P.

Bruce P.

You’ve got a big fan in me. Oh yeah, the car is awesome. Runs like a raped ape. So thanks a lot !
Read More ->


David P.

David P.

Thanks for the brake lines !
Read More ->


Mike M.

John's very honest, something that's hard to find these days. This means he'll tell you the truth and you may not want to hear it. LOL. The best...
Read More ->


Pete L.

Pete L.

Mopar RB 440 Aluminum block with a Procharger. Makes 1600 HP!!
Read More ->


Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Ricky R.

Ricky R.

1937 Chevy Legends Race Car, Thanks for everything!
Read More ->


Robbie C.

Robbie C.

Great job all round !
Read More ->


Jim A.

Jim A.

Two year champion in modified tractor pulling classes named "Watch This Trick". Chrysler 426 Hemi. Thanks for the Great Service!
Read More ->


5.7 and 6.1L Hemi Dynatech Supermaxx Headers W/ No Cats

Dynatech 05-07 300c/Charger/Magnum 5.7L Supermaxx Headers

These 1-3/4" SuperMaxx headers from Dynatech incorporate the latest in racing exhaust technology for increased horsepower and torque. They feature all T-304 stainless steel construction for strength and durability, along with CAD designed Aero-flow collectors. Header gaskets and bolts are included. No Cats Included.

Contact Southeast Performance for applications and pricing.




Parse Time: 0.225 - Number of Queries: 262 - Query Time: 0.053210099288941