m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
    |_ 5.7 / 6.1L Hemi Gasket Sets->
    |_ 5.7 / 6.1 Hemi Alternator Fan
    |_ 5.7 / 6.1 Hemi Roller Rockers
    |_ 5.7 / 6.1 HEMI Turbo Kits
    |_ 5.7 / 6.1L Billet Accessories
    |_ 5.7 / 6.1L Hemi Axle Hub Kit
    |_ 5.7 / 6.1L Hemi Belts
    |_ 5.7 / 6.1L Hemi Bolts and Studs
    |_ 5.7 / 6.1L Hemi Camshafts
    |_ 5.7 / 6.1L Hemi Cold Air Kits
    |_ 5.7 / 6.1L Hemi Connecting Rods
    |_ 5.7 / 6.1L Hemi Converters->
    |_ 5.7 / 6.1L Hemi Crank Dampers
    |_ 5.7 / 6.1L Hemi Crankshafts
    |_ 5.7 / 6.1L HEMI Engine Bearings
    |_ 5.7 / 6.1L Hemi Exhaust
    |_ 5.7 / 6.1L Hemi Fuel Injectors
    |_ 5.7 / 6.1L Hemi Fuel Rails
    |_ 5.7 / 6.1L Hemi Intake Manifolds
    |_ 5.7 / 6.1L Hemi Nitrous Systems
    |_ 5.7 / 6.1L HEMI Oil Pans->
    |_ 5.7 / 6.1L Hemi Oiling System
    |_ 5.7 / 6.1L Hemi Piston Rings
    |_ 5.7 / 6.1L Hemi Pistons
    |_ 5.7 / 6.1L Hemi Superchargers
    |_ 5.7 / 6.1L Hemi Suspension
    |_ 5.7 / 6.1L HEMI Throttle Bodies
    |_ 5.7 / 6.1L Hemi Timing Sets
    |_ 5.7 / 6.1L Hemi Transmissions
    |_ 5.7 / 6.1L HEMI Tuning
    |_ 5.7 / 6.1L Hemi Valvetrain
    |_ 5.7 6.1 6.4 Hemi Cylinder Heads
    |_ 5.7L Hemi Water Pump
    |_ 6.1L HEMI Aluminum Blocks
    |_ 6.1L Hemi Lifters
    |_ Carbon Fiber
    |_ Custom 5.7 / 6.1L Chipkiller
    |_ Custom Hemi Billet Main Caps
    |_ Custom Hemi Floor Mats
    |_ Gen 3 Hemi Oil Squirter Plug
    |_ Hemi 5.7 / 6.1L Power Packages
    |_ Hemi 5.7 and 6.1L Valve Covers
    |_ HEMI Drive Shaft Loop
    |_ Hemi Serpentine Belt Conversions
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Don S.

John, I can't emphasize this enough, but without the help you're getting me I could not have afforded my dream engine! I literally have cringed when...
Read More ->


Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


Marko T.

Marko T.

I have been building cars over 20 years and you have been the best parts dealer ever! Thanx for your friendship! -Marko, Finland
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


William K.

William K.

Well your service is amazing if you want my opinion. Never had better from any company I've ordered from. William K.
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Robert M.

John, Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Michael D.

I just wish there were more guys like you around for us gen3 guys. Most just want a sale and don't care to actually help let alone give advice or...
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Maurice

Maurice

Maurice 73 Dodge Dart
Read More ->


Pete L.

Pete L.

Mopar RB 440 Aluminum block with a Procharger. Makes 1600 HP!!
Read More ->


Daryl S.

Your 408 runs like a dream. I think we are well over the 400hp side, a new 300hp mustang could not overcome, it is a beast. I am very happy with the...
Read More ->


Ricky R.

Ricky R.

1937 Chevy Legends Race Car, Thanks for everything!
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Marko T.

Marko T.

Hi John! Thanks again for the great service! Marko T. Finland
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Andrew R.

Andrew R.

I am very pleased with the quality of the magnum deep pan, and the best part is that it really is not much deeper than the stock pan so I dont have...
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Bruce P.

Bruce P.

John, you have been so prompt and helpful. Take care my friend and thanks again. I'll be back. Bruce
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


5.7L Hemi JBA Cat4ward Headers

Increased horsepower and torque for all 50 states. Bolt on extra horsepower and torque with 50-state smog legal JBA Cat4ward headers. These headers are designed to last, with 3/8 in. thick laser-cut flanges, smooth mandrel-bent tubing, and JBA's patented Firecone collectors. Available in either 14-gauge steel or 409 stainless steel, these headers are offered in your choice of chrome plated or high-temperature silver ceramic finishes for most applications. JBA includes high-quality mounting hardware and instructions, and best of all, most applications simply bolt on without any additional exhaust modifications.
Fits these cars:
  • 2005-2007 Chrysler 300c 5.7L Hemi
  • 2005-2007 Dodge Magnum 5.7L Hemi
  • 2005-2007 Dodge Charger 5.7L Hemi

    Features:
  • Increased horsepower and torque throughout RPM
  • Improved throttle response
  • Ceramic coating reduces under-hood temperature
  • Improved fuel economy
  • Improved engine compartment aesthetics

    Specifications:
  • Product: Cat4ward® Shorty
  • Header Material: Stainless steel
  • Header Finish: Natural
  • Header Style: Shorty
  • Primary Tube Diam (in): 1 3/4”
  • Flange Style: 1 Piece
  • Flange Thickness (in): 3/8"
  • Collector Style: JBA Firecone®
  • Collector Attachment: Stock Flange
  • Hardware Included: Yes
  • Gaskets Included: Yes
  • Reducers Included: No
  • Mid-Pipe Required: No
  • Quantity: Sold as a pair
  • Instructions: Download Instructions
  • Install Time: 5 Hours

    All items we sell are brand new from the factory. We do not sell used or remanufactured parts.
  • Contact Southeast Performance for details and pricing.




    Parse Time: 0.224 - Number of Queries: 262 - Query Time: 0.050480011276246