Product List
A New Product->Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
|_ Camshaft Thrust Buttons->
|_ Camshafts->
|_ Cylinder Heads->
|_ Dodge SRT4 Turbo->
|_ Engine Components->
|_ Engine Girdles->
|_ HEMI 5.7L, 6.1L, 6.4L Components->
|_ 5.7 / 6.1L Hemi Gasket Sets->
|_ 5.7 / 6.1 Hemi Alternator Fan
|_ 5.7 / 6.1 Hemi Roller Rockers
|_ 5.7 / 6.1 HEMI Turbo Kits
|_ 5.7 / 6.1L Billet Accessories
|_ 5.7 / 6.1L Hemi Axle Hub Kit
|_ 5.7 / 6.1L Hemi Belts
|_ 5.7 / 6.1L Hemi Bolts and Studs
|_ 5.7 / 6.1L Hemi Camshafts
|_ 5.7 / 6.1L Hemi Cold Air Kits
|_ 5.7 / 6.1L Hemi Connecting Rods
|_ 5.7 / 6.1L Hemi Converters->
|_ 5.7 / 6.1L Hemi Crank Dampers
|_ 5.7 / 6.1L Hemi Crankshafts
|_ 5.7 / 6.1L HEMI Engine Bearings
|_ 5.7 / 6.1L Hemi Exhaust
|_ 5.7 / 6.1L Hemi Fuel Injectors
|_ 5.7 / 6.1L Hemi Fuel Rails
|_ 5.7 / 6.1L Hemi Intake Manifolds
|_ 5.7 / 6.1L Hemi Nitrous Systems
|_ 5.7 / 6.1L HEMI Oil Pans->
|_ 5.7 / 6.1L Hemi Oiling System
|_ 5.7 / 6.1L Hemi Piston Rings
|_ 5.7 / 6.1L Hemi Pistons
|_ 5.7 / 6.1L Hemi Superchargers
|_ 5.7 / 6.1L Hemi Suspension
|_ 5.7 / 6.1L HEMI Throttle Bodies
|_ 5.7 / 6.1L Hemi Timing Sets
|_ 5.7 / 6.1L Hemi Transmissions
|_ 5.7 / 6.1L HEMI Tuning
|_ 5.7 / 6.1L Hemi Valvetrain
|_ 5.7 6.1 6.4 Hemi Cylinder Heads
|_ 5.7L Hemi Water Pump
|_ 6.1L HEMI Aluminum Blocks
|_ 6.1L Hemi Lifters
|_ Carbon Fiber
|_ Custom 5.7 / 6.1L Chipkiller
|_ Custom Hemi Billet Main Caps
|_ Custom Hemi Floor Mats
|_ Gen 3 Hemi Oil Squirter Plug
|_ Hemi 5.7 / 6.1L Power Packages
|_ Hemi 5.7 and 6.1L Valve Covers
|_ HEMI Drive Shaft Loop
|_ Hemi Serpentine Belt Conversions
|_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->
Customers
John!! Got my Viper back together, dyno tuned. Super happy with the results of your work!! Gained 112 RWHP and 107RWTQ!!!!! More at the crank. Sounds...
Read More ->
Brian C.
I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->
Darren B.
John,Racing flat out on the 440/533 engine over 1 season & 65 passes at 8.97@150mph 1.27 60' getting great results!!Engine is GREAT!Thanks mate!
Read More ->
Steve V.
.jpg "Steve V."){kind=small}
You are the only guy who I trust to do the most important thing I'll ever do to my Roadrunner, a car that means more to me than any inanimate object...
Read More ->
Bruce P.
John, you have been so prompt and helpful. Take care my friend and thanks again. I'll be back. Bruce
Read More ->
Ryan
bought numerous things and all transactions went very smooth. Responded to emails within a day or less. Ryan
Read More ->
Tom R.
John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->
Taylor M.
Thanks a lot John !
Read More ->
Troy K.
Thanks for all your great help with my Viper.
Read More ->
Ricky R.
1937 Chevy Legends Race Car, Thanks for everything!
Read More ->
James G.
5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->
Ian A.
I wanted to thank you for all your help and support, for being so patient and for being a good, honest person and especially so professional....
Read More ->
Brian A.
The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->
William K.
Well your service is amazing if you want my opinion. Never had better from any company I've ordered from. William K.
Read More ->
Daniel C.
Thanks for your exemplary service. Keep doing what you're doing.
Daniel C.
Read More ->
Kyle M.
John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->
Buyer
Super guy to deal with! GREAT SERVICE!! GREAT PRICE!!
Read More ->
Vincent G.
Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->
Jim W.
Thanks for the fast parts service and Great cylinder head porting! Jim
Read More ->
Dan F.
John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes!
Thanks
Read More ->
Robert M.
John,
Thank you for all you have done, From your previous email responses, you seem to be old school, a man of his word. Thanks again John for...
Read More ->
Alan P.
First off, I just have to say that I have never came
across a more stand-up guy that takes his time to connect with his customers and have the...
Read More ->
Matt G.
I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->
Ricky J.
Thanks for all the info, you have been a great help and a credit to your company.
Read More ->
Mitch C.
Awesome work! Glad I went with you guys! Anyone I know of that wants to build I'll send your way! Thanks John! Your the man!! Mitch
Read More ->