m menu image  m home

Product List

A New Product->
Adjustable PCV Valve Stops Leaks
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetor Modifications
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Blocks
Engine Parts->
  |_ Camshaft Thrust Buttons->
  |_ Camshafts->
  |_ Cylinder Heads->
  |_ Dodge SRT4 Turbo->
  |_ Engine Components->
    |_ Connecting Rods->
    |_ Crankshaft Dampers->
    |_ Crankshafts->
    |_ Engine Bare Blocks->
    |_ Engine Bearing Spacers
    |_ Engine Bearings->
    |_ Engine Block Main Caps->
    |_ Engine Rotating Assemblies->
    |_ K&P Engineering Filters
    |_ Lifters->
    |_ Mopar B / RB Rear Seal Retainer
    |_ Mopar B/RB Windage Tray
    |_ Mopar BB valley Tray Hold Downs
    |_ Oil Pans->
      |_ B&B Oil Pans
      |_ Canton Oil Pans
      |_ Champ Oil Pans
      |_ Charlies Oil Pans
      |_ Hamburgers Oil Pans
      |_ Milodon Oil Pans
      |_ Moroso Oil Pans
      |_ Pro Cam Oil Pans
      |_ Southeast performance Oil Pans
      |_ Stef's Oil Pans
      |_ Viper Gen 2 Oil Pan Gate Kit
      |_ Winston Cup Custom Oil Pans
    |_ Oil Pumps->
    |_ Piston Rings->
    |_ Pistons->
    |_ Pushrods->
    |_ Timing Chain sets->
  |_ Engine Girdles->
  |_ HEMI 5.7L, 6.1L, 6.4L Components->
  |_ Intake Manifolds->
Engine Swap Kits
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
Gaskets->
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
Striker Viper heads Return
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Scot C.

Scot C.

Thanks for everything John. We will be doing business again. At Nationals 6.38 on a 6.54 dial in.
Read More ->


Andrew R.

Andrew R.

I am very pleased with the quality of the magnum deep pan, and the best part is that it really is not much deeper than the stock pan so I dont have...
Read More ->


Felix C.

How awesome is this! This superb service is exactly on point w/what everyone have raved about. Thank you, Felix
Read More ->


Mitch C.

Awesome work! Glad I went with you guys! Anyone I know of that wants to build I'll send your way! Thanks John! Your the man!! Mitch
Read More ->


Michael D.

I just wish there were more guys like you around for us gen3 guys. Most just want a sale and don't care to actually help let alone give advice or...
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Darren B.

Darren B.

John,Racing flat out on the 440/533 engine over 1 season & 65 passes at 8.97@150mph 1.27 60' getting great results!!Engine is GREAT!Thanks mate!
Read More ->


Kayden G.

Kayden G.

Well your service is amazing. Never had better from any company I've ordered from! Kayden
Read More ->


Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Daniel C.

Daniel C.

Thanks for your exemplary service. Keep doing what you're doing. Daniel C.
Read More ->


Billy W.

Billy W.

Dakota R/T 408
Read More ->


Rob D.

John is a real awesome guy. i couldn't thank u enough for all the help over 7-8 years.
Read More ->


Henry T.

Henry T.

HEY! Everything is installed and car runs AWESOME! Thanks for everything, Thanks again. Henry 2000 Dodge Viper R/T 10
Read More ->


Vincent G.

Thanks for all, Your shop is very highly recommended by a lot of Dakota/Durango owners up here in Canada.
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Kyle M.

Kyle M.

John, I am very pleased with the brake conversion. The kit was very easy to install and I didn't have any problems and look very good as...
Read More ->


Marko T.

Marko T.

I have been building cars over 20 years and you have been the best parts dealer ever! Thanx for your friendship! -Marko, Finland
Read More ->


Ricky J.

Thanks for all the info, you have been a great help and a credit to your company.
Read More ->


Tom R.

John--the 408 engine you built for me is outstanding. Feel free to give him my cell number and I'll happily give you a strong reference. Thank you...
Read More ->


Mike M.

John's very honest, something that's hard to find these days. This means he'll tell you the truth and you may not want to hear it. LOL. The best...
Read More ->


Steven

Southeast Performance and John Mercedes have been "OUTSTANDING" to do business with. I couldn't be happier.
Read More ->


Robert S.

Robert S.

426 Hemi Cuda
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Robbie C.

Robbie C.

Great job all round !
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


B&B Oil PAns

Since 1974, B&B Performance Sales has laid the ground work of quality, commitment, and service to our customers and will continue to do so through our 32nd year of business in 2007 of this new millennium. With our on-going research and development by our parent company’s founder, Joe Stefanacci of Stef’s Performance Products Inc., B&B has developed several new innovative products for the performance engine builder.



Parse Time: 0.207 - Number of Queries: 248 - Query Time: 0.048197234970093