m menu image  m home

Product List

A A "NEW" Mopar SB Cylinder Head
A Chrysler 426 and 440 Blocks
A Mopar News
A New Mopar B/RB Windage Tray
A New Trick Flow Mopar Head
Air Conditioning Custom Kits->
Automotive and Marine Covers
Brakes->
Carburetors->
Chrome Accessories->
Chute Kits->
Clutches->
Cold Air Kits->
Custom Hoods->
Custom Parts Development->
Cylinder Head Porting->
Electric Cooling Fans->
Electronics and Delay Boxes->
Engine Parts->
Engines->
Exhaust Components->
Exterior Vehicle Components->
Fasteners->
Fire Equipment->
Floor Mats->
Fuel Injection Systems
Fuel System Components->
  |_ AEM Products
  |_ Aeromotive Components
  |_ Aeroquip Components
  |_ ATL Fuel Cells
  |_ Carter Fuel Components
  |_ Earls Fittings
  |_ Edelbrock Fuel Components
  |_ Enderle Fuel Sytems
  |_ FAST Air Fuel meter
  |_ FAST Fuel Injection
  |_ FAST Fuel Systems
  |_ Fuel Safe Racing Cells
  |_ Hillborn Fuel Injection
  |_ Holley Fuel Systems
  |_ Jazz Fuel Cells
  |_ Kinsler Fuel Injection
  |_ Magna Fuel Components
  |_ Mallory Fuel Pumps
  |_ MTS Plastic Fuel Tanks
  |_ Quick Fuel Technologies
  |_ Race Fuel Pumps
  |_ Russel Fittings
  |_ Walbro Fuel Pumps
Gauges->
Gear Venders Overdrive Units
Ignition Components->
Lift Kits->
Lowering Kits->
Nitrous Kits->
Race Car Bodies->
Race Wear and Accessories->
Radiators and Components->
Rear End->
Roll Cages and Accessories->
Seats and Custom Interiors->
Shocks->
Spark Plugs->
SuperChargers->
Suspension Components->
Tech Help
Throttle Bodies->
Tires->
Traction Components->
Transmission Components->
Tuning and Controllers->
Turbocharging->
Valvetrain Components->
Viper
Water Pumps->
Wheels->
Wideband Monitoring Systems->
Wiring harness and Accessories->

Customers

Benny C.

Benny C.

Thanks for the Great Mopar Service !
Read More ->


Michael W.

Michael W.

After getting all the compatible stuff shes a beast! Michael
Read More ->


James G.

James G.

5.80 in 1/4 mile @ 244 mph & 3.76 @ 197 in the 1/8 mile
Read More ->


Taylor M.

Taylor M.

Thanks a lot John !
Read More ->


David A.

David A.

Thanks for everything, David
Read More ->


Colton H.

Colton H.

"Johns the man, bought a 410 package from him years ago after I got back from overseas. The caveat I gave John was that it had to pass Californian...
Read More ->


Steve F.

Thank You for all your help and hookups with the parts - sounds like a lot of people appreciate it, I'm one of those people. - Steve
Read More ->


Brian A.

Brian A.

The 408 engine runs strong, put on dyno 405hp with 415tq N/A not shabby.. also was on 22" wheels with those numbers est. 500-525 @ crank. Thanks so...
Read More ->


Phil S.

Phil S.

Great job creating this Dakota R/T Ground Affects Kit. Phil
Read More ->


Robert S.

Robert S.

Great parts and service! Robert
Read More ->


Brian C.

Brian C.

I have never had any problems with John on any transaction. One of the few vendors I have never had a single problem with. Including paying overnight...
Read More ->


Toby W.

John, Thanks again so much. You're truly awesome.
Read More ->


Robert S.

Robert S.

426 Hemi Cuda
Read More ->


Carl E.

Carl E.

Dodge SRT-10 Viper
Read More ->


Derek B.

Derek B.

Great Personalized service. Derek
Read More ->


Ryan

bought numerous things and all transactions went very smooth. Responded to emails within a day or less. Ryan
Read More ->


Dan B.

Dan B.

Dakota R/T 408, Thanks for everything! Dan https://www.youtube.com/watch?v=wZekmXKYXA4
Read More ->


Matt G.

I just want to say thanks for all that you have done for me, because over the weekend I was the fastest R/T out there with no power-adders and still...
Read More ->


Steve B.

Steve B.

Thanks for the help with my 426 stroker.
Read More ->


Alan P.

First off, I just have to say that I have never came across a more stand-up guy that takes his time to connect with his customers and have the...
Read More ->


Don S.

John, I can't emphasize this enough, but without the help you're getting me I could not have afforded my dream engine! I literally have cringed when...
Read More ->


Dan F.

Dan F.

John, The truck is not done but i drive it daily and it runs good now. Eventually id like to do the rear brakes! Thanks
Read More ->


Buyer

Super guy to deal with! GREAT SERVICE!! GREAT PRICE!!
Read More ->


Bob F.

Bob F.

Plymouth 426 Hemi
Read More ->


Matt C.

Thanks again John, someone who’s willing to help and not just sell parts. So, looks like you’ll be listed on my referrals. Keep in touch. Thanks...
Read More ->


Russel Fittings and Fuel COmponents

FULL FLOW HOSE ENDS
DESIGNED TO BE USED WITH PROFLEX AND PRORACE HOSE!
       

For over a quarter of a century, Russell's unique taper-designed Full-Flow hose ends have been the choice of racing professionals.

Lightweight aluminum hose ends are completely reusable
Unique taper design ensures easy assembly
Stainless steel hose ends feature a unique taper design for easy assembly
37º angled sealing surface guarantees a positive anti-leak seal (does not require a sealing compound or Teflon® tape)
Now available in two corrosion resistant finishes:
– Red and blue anodized
– Ultra brite Endura - unique finish which simulates the appearance of stainless steel
Interchangeable with many other manufacturers' hose ends

Accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings

STAINLESS STEEL HOSE ENDS AND FITTINGS
THE BEST HOSE ENDS AND FITTINGS ON THE MARKET,PERIOD!

Russell Stainless Steel Adapter Fittings and Full Flow Hose Ends are made of extremely durable 303 stainless steel, precision machined to ensure precise thread engagement and a tight seal. Russell stainless steel hose ends and fittings provide maximum protection against corrosion and the ultimate in strength and appearance. Russell's Full Flow hose ends have been the choice of racing professionals for more than 25 years, and the addition of our new 303 stainless steel fittings and ends make this the premium choice for all severe-duty applications including marine, street rods and race. This year, we've expanded our line of adapters to provide the widest range of coverage for whatever plumbing problem you need to solve.

Stainless steel offers the ultimate in strength and appearance
Maximum corrosion protection… stainless is your best choice to withstand harsh environments such as marine and off-road
Stainless steel hose ends feature a unique taper design for easy assembly
Interchangeable with many other manufacturers' hose ends and adapter fittings
Stainless steel hose ends work with aluminum or stainless steel AN adapter fittings

 UNIQUE 360º SWIVEL HOSE ENDS FIT PROFLEX & PRORACE HOSE

Russell's Full Flow Swivel Hose Ends swivel 360º to maximize hose installation allowing for quick alignment of ends after hose assembly.

360º of adjustability after assembly
FullFlow ends are completely re-useable
Unique taper design ensures easy assembly
37º angled sealing surface guarantees a positive anti-leak seal (does not require a sealing compound or Teflon® tape)
Mandrel bent tubing for superior flow
Available in two finishes:
- Red and blue anodized
- Ultra brite Endura - unique finish which simulates the appearance of stainless steel
Interchangeable with most manufacturers hose ends
Accepts a wide variety of lightweight AN style adapter & carburetor fittings




Parse Time: 0.178 - Number of Queries: 224 - Query Time: 0.0355520399323