New Products

Upper control arm protective boot kit for Hotchkis 1110 A-Arms. Applications: 1969-1971 Plymouth Roadrunner 1966-1970 Dodge Super Bee 1966-1970 Dodge...

NEW BILLET ALUMINUM 413/440/426 MOPAR TIMING COVER AND FEL-PRO GASKETS. THIS IS A TRUE BILLET PIECE, it WILL NOT FLEX UNDER CAM BUTTON PRESSURE. THIS...

426 Chrysler, Plymouth, Mopar Hemi Rocker Shafts, set of 4. These shafts are precision ground from special hardened steel. They are then treated for...

TOTALLY ADJUSTABLE TIMING POINTER FOR ALL GEN 3 HEMI ENGINES. THIS POINTER WILL FIT ALL DIAMETER ATI AND STOCK BALANCERS. THIS POINTER WILL FIT ALL...

BILLET ALUMINUM, REUSABLE Block Plugs are a direct replacement for the MDS Valve on all 5.7, 6.1 and 6.4 Generation III Hemi Engines. This MDS Plug...

NEW, CNC Machined Billet Aluminum 383-400-440 Center 3 Side Bolt Main Caps. These custom designed side bolt main caps are designed to add strength...

426 HEMI, MOPAR, CHRYSLER, PLYMOUTH BILLET ROCKER STANDS. HARDENED STEEL HEAD STUD INSERTS AVAILABLE FOR 1/2" TO 9/16" HEAD STUDS. HEADENED STEEL...

Center Flange Engine Jaw. Machined from 4140 steel and heat treated for excellent wear resistance. A 1/2" square hole is provide to enable to rotate...

NEW 5.7, 6.1, 6.4 Generation 3 Hemi Rocker Shaft Collars. Complete set of 16 Brand New Billet Aluminum Collars. These Collars are designed to keep...

NEW BILLET ALUMINUM 440 Chrysler, Dodge, Plymouth, Mopar 2 bolt main caps. These Billet offer caps more strength and durability than the stock cast...

5.7 - 6.4 Gen 3 Hemi Variable Timing Replacement Plug. This Billet Aluminum Plug is the replacement for all 5.7 - 6.4 Gen 3 Hemis when the Variable...

New, Annodized Mopar 383-440 R/RB, Blue, Billet Aluminum Rocker Shaft Hold Down Kit. Hold down clamps are CNC Machined to exact factory spec...

Mopar Hemi 6.4 Rocker Shaft Stabilizers and Collars, complete set. These 6.4 Stabilizers and Collars will virtually elimate the possibility of rocker...

Complete New Set of 10 Stabilizers and 16 New Rocker Arm Collars for gen 3 Chrysler 5.7, 6.1L Hemi. This combination of Stabilizers and Collars will...

NEW HEAVY WALL MOPAR 361-440 ROCKER SHAFTS, 1 PAIR (2). THESE SHAFTS ARE MANUFACTURED IN OUR SHOP TO EXACT SPEC, THEN TREATED WITH MELONITE NITRATE...

361-440 Mopar Billet Aluminum CNC Machined, Fully Adjustable Timing Marker. These Billet Timing Markers bolt directly to the front of all Big Block...

Billet Aluminum Rear Main Seal Retainer. Fits all 383 to 440 Mopar Engines. This is a direct replacement for the stock di-cast Mopar retainer. CNC...

Trick Flow is all about developing products that provide maximum performance, such as the PowerPort® 190 cylinder heads for small block Mopar. The...

If your after a Gen 11 Chrysler 426 Hemi short block, we can build your current 426 Hemi block retaining the stock stroke or create a...

If your after a Gen 11 Chrysler 426 Hemi, your in luck. We are accessing new 426 Hemi aluminum race blocks good for street and or strip applications....

Years of experience and hundreds of successful builds have given us a pretty good idea of what these motors like!  If you're looking to make...

This Chrysler 5.7 Hemi engine was used in the 2003-2008 Dodge Chargers, Magnums, 300s, Ram Trucks, Jeep Commanders and Grand Cherokees. We have...

With Holley Range, No more shuddering as your engine cycles between running on half or all cylinders Improved power at light throttle with all...

Terminator X and X Max Features and Benefits Plug and play for Ford Modular Engines, 4.6L 2V and 4V, or 5.4L 2V or 4V. Genuine Bosch LSU 4.9 Wideband...

erminator X and X Max Features and Benefits Plug and play 5.0L Coyote engine control Ford Drive-by Wire Throttle Body Control (Terminator X Max Only)...

TERMINATOR X GEN III HEMI New for 03-13+ Chrysler Gen III Hemi, Terminator X brings fully tune-able fuel injection to your next Mopar engine swap!...

Terminator X and X Max Features and Benefits: Plug and play GEN III HEMI engine control for 2003-2013+ such as the 5.7L, 6.1L and 6.4L engines Plug...

How to Measure For Custom Axles   Front Axle Measurement Guide      Typical measurement with intermediate bar/shaft and axle...

How to Measure For A Custom Driveshaft   For vehicles with a slide in transmission yoke and a yoke on the differential:      ...

Angle Calibration   One of the most misunderstood things in drivetrain technology is understanding the driveshaft angle and what its effects...